ZyXEL Communications Prestige 794M - Manual (Page 37)

Prestige 794M User’s Guide
37 Chapter 2 The Web Configurator
2.8.1 Auto Scan
Use the Auto Scan screen to set the Prestige to automatically detect the Internet connection
type.
Follow the steps below to allow the Prestige to automatically detect the Internet connection
settings.
1 Click Auto Scan in the Quick Start screen to display the screen as shown next.
Figure 19 Quick Start: Auto Scan
2 If provided, enter the IP addresses of the DSLAM device or a gateway.
3 Click Start to begin the scanning process.
4 When the auto scan is complete and successful, a screen displays. Select your option from
the list and click Apply. Otherwise, click Cancel and return to the Quick Start screen
and configure the Internet access settings manually.
Username Enter the Internet access account username.
Password Enter the password associated with the username above.
Apply Click Apply to save the changes.
Cancel Click Cancel to start configuring this screen again.
Table 12 Quick Start (continued)
LABEL DESCRIPTION