Zanussi ZU 8124 - Manual (Page 7)

7
Electrical Connection
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
1 WARNING – THIS APPLIANCE MUST
BE EARTHED
The manufacturer declines any liability
should these safety measures not be obser-
ved.
Before switching on, make sure the electricity
supply voltage is the same as that indicated on
the appliance rating plate. The rating plate is
inside, on the left.
The appliance is supplied with a 13 amp plug fit-
ted. In the event of having to change the fuse in
the plug supplied, a 13 amp ASTA approved (BS
1362) fuse must be used.
Important
The wires in the mains lead are coloured in
accordance with the following code:
Green and Yellow Earth
Blue Neutral
Brown Live
As the colours of the wires in the mains lead of
this appliance may not correspond with the
coloured markings indentifying the terminals in
your plug, proceed as follows:
1. The wire coloured green and yellow must be
connected to the terminal marked with the let-
ter „E“ or by the earth symbol or coloured
green and yellow.
2. The wire coloured blue must be connected to
the terminal „N“ or coloured black.
3. The wire coloured brown must be connected
to the terminal marked „L“ or coloured red.
4. Upon completion there must be not cut, or
stray strands of wire present and the cord
clamp must be secure over the outer sheat.
1 Warning! A cut-off plug inserted into a 13
amp socket is a serious safety (shock)
hazard. Ensure that the cut-off plug is dis-
posed of safely.
Description of the appliance
View of the appliance
➀
Temperature regulator and light switch
➁
Butter/cheese compartment
➂
Door storage compartment
➃
Bottle shelf
➄
Vegetable basket
➅
Storage racks
➆
Freezer compartment
➇
Rating plate
Blue
Green
& Yellow
Brown
Cord Clamp