Connecting the system, English – Yamaha RL RX-E100 User Manual
Page 7
E-5
English
L
R
SYSTEM
CONNECTOR
DIGITAL
OPTICAL
ANALOG
OUT
OUT
STEP
FREQUENCY
D
L
R
C
A
B
E
E
L
R
L
R
SYSTEM
CONNETOR
SUBWOOFER
OUT
OUT
IN
IN
MD
CD
AUX
TAPE
6
Ω
MIN./SPEAKER
SPEAKERS
FM ANT
GND
AM ANT
75
Ω
UNBAL
Adding KX-E100 and MDX-E100 to the above system
(For details, refer to the owner's manual
supplied with the respective component.)
1
Connect Å and ı of RX-E100 to Å and ı of KX-E100.
2
Connect Ç and Î of RX-E100 to Ç and Î of MDX-E100.
3
Connect an external component to the
AUX
terminal of RX-E100.
4
Connect
DIGITAL OPTICAL
OUT
of CDX-E100 to
DIGITAL OPTICAL IN
of MDX-E100.
Take off the covers of the optical fiber cable plug, the
DIGITAL OPTICAL OUT
jack, and the
DIGITAL OPTICAL
IN
jack before making digital connections. Be sure to replace the terminal’s cover when the terminal on the rear panel
is not being used, in order to protect from dust.
5
AC OUTLET
(CDX-E100)
Connect the AC power plug of MDX-E100 or KX-E100 (Except for the UK model).
Connecting the system
GETTING STARTED
Connecting RX-E100 and CDX-E100
1
Connect ‰ to ‰ using the RCA pin cable.
Insert the plugs into the jacks of the same colour.
2
Connect RX-E100 and CDX-E100 with the system control cable.
The other
SYSTEM CONNECTOR
of CDX-E100 is for connecting MDX-E100 or KX-E100.
3
Connect the AC power plug of CDX-E100 to
AC OUTLET
of RX-E100.
To wall outlet
To RX-E100
System control cable
RCA pin cable
1
2
3