Zebra Technologies 2722 - Manual (Page 2)

FOREWORD
This manual provides installation and operation information for the LP2722, TLP2722, LP2742,
TLP2742 and TLP3742 series printers, manufactured by Zebra Technologies Corporation,
Camarillo, California.
RETURN MATERIALS AUTHORIZATION
Before returning any equipment to Zebra for in warranty or out of warranty repair, contact Repair
Administration for a Return Materials Authorization (RMA) number.Repack the equipment in the
original packing material and mark the RMA number clearly on the outside.Ship the equipment,
freight prepaid, to the address listed below:
Zebra Eltron Repair Administration, USA
1001 Flynn Road
Camarillo, CA. 93012
Phone: +1 (805) 579-1800
FAX: +1 (805) 579-1808
Label Printers: Card Printers:
Zebra Technologies, Europe Zebra Technologies, Europe
Eltron House Zone Indutrielle, Rue d'Amsterdam
Molly Millars Lane 44370 Varades, France
Wokingham RG41 2QZ England Phone: +33 (0) 240 097 070
Phone: +44 (0) 1189 770 300 FAX: +33 (0) 240 834 745
FAX: +44 (0) 1189 895 762
COPYRIGHT NOTICE
This document contains information proprietary to Zebra Technologies Corporation.This docu-
ment and the informationcontainedwithin is copyrightedby Zebra TechnologiesCorporationand
may not be duplicated in full or in part by any person without written approval from Zebra.While
every effort has been made to keep the informationcontainedwithin current and accurate as of the
date of publication, no guarantee is given or implied that the document is error-free or that it is ac-
curate with regard to any specification.Zebra reserves the right to make changes,for the purposeof
product improvement, at any time.
TRADEMARKS
LP2722, TLP2722, LP2742, TLP2742 and TLP3742 are service marks and Eltron is a registered
trademark of Zebra Technologies Corporation.Windows and MS-DOS are registered trademarks
of Microsoft Corp.All other marks are trademarksor registered trademarksof their respectivehold-
ers.
ii
980260-001 Rev.A