ZyXEL Communications Prestige 100MH - Manual (Page 19)

Prestige 100MH Quick Start Guide
15
Chapter 4
Windows NT Quick Start
This chapter shows you the step-by-step instructions to configure your Windows NT
workstations for Internet access.
4.1 TCP/IP Installation
You must first install TCP/IP protocol on each Windows NT workstation before you can use it
to access the Internet. If you have already installed TCP/IP, skip to the TCP/IP Configuration
section on page 15; otherwise, follow these steps:
Step 1. From the Start Menu , select Settings then open Control Panel .
Step 2. Double -click the Network icon to open the Network control panel.
Step 3. Select the Protocols tab, then click the Add… button.