ZyXEL Communications Prestige 100MH - Manual (Page 17)

Prestige 100MH Quick Start Guide
13
Step 7. On the DNS Configuration tab, select Enable DNS . Enter a unique name for the
workstation in the Host box. Enter your domain name in the Domain box if you have
one. This field is optional and can be left blank. Leave the DNS Server Search Order
box blank if you plan to get the DNS server address(es) from a DHCP server.
Otherwise enter the DNS server address of your ISP in the third box and click
Add .
Click OK to save and close TCP/IP dialog.
Step 8. Now Click OK to close the Network control panel. You may be prompted to insert
your Windows 95 CD or disks. When the drivers are updated, you may be prompted to
restart the system. Make sure the Prestige is powered on before clicking
yes and
allow the workstation to restart.
Step 9. From the Windows 95 Start Menu, choose RUN . Then type “winipcfg” and click OK .
This will show the IP address of your workstation. If no address is shown, verify your
cabling.
Repeat the above steps for each Windows 95 workstation on your LAN.