Using quick corner, Correcting computer images – Zyliss PowerLite 835p User Manual

Page 8

Epson PowerLite 835p

10/04

Note: The image will be slightly smaller after adjusting. If it’s
important to maintain the correct aspect ratio, use the menu
system to perform keystone correction, then use the remote’s

Resize

button to adjust the aspect ratio.

❏ Press the

button on the remote control, select the

Setting

menu, and press

Enter

. From the Setting menu,

select

Keystone

and press

Enter

, select

H/V Keystone

and

press

Enter

, then select

Horiz./Vert./Height

and press

Enter

Select

V-Keystone

(for vertical keystone distortion) or

H-

Keystone

(for horizontal keystone distortion) and press

Enter

. Use the

pointer button on the remote control to

adjust the keystone setting as needed.

Using Quick Corner

If your projected image has no parallel sides, you can even up
the sides using Quick Corner. Follow these steps:

1. Press the

button on the remote control (or on the

projector’s control panel).

2. Select the

Setting

menu and press

Enter

Note: If you are already using Keystone settings, you see a
warning message. To disable keystone settings and use Quick
Corner instead, press

Enter

; to keep your settings, press

Esc

3. From the Setting menu, select

Keystone

and press

Enter

4. Select

Quick Corner

and press

Enter

You see this screen:

5. Press the

Enter

button to select the corner you want to

adjust.

6. Use the

pointer button on the remote control (or the

arrow buttons on the projector) to adjust the shape.

Note: If you are not satisfied with the corrections made, press
the

Esc

button for one second to reset the screen to its original

shape.

7. Repeat steps 5 and 6 as needed to adjust any remaining

corners.

8. When you’re done, press the

Esc

button on the remote

control or projector’s control panel to exit the menu
system.

Quick Corner

remains selected in the Keystone menu, the

Quick Corner screen appears whenever you press the
projector’s keystone buttons. You can then follow steps 5
through 8 above to correct the shape of your image or press

Esc

to exit Quick Corner.

Correcting Computer Images

If you’re connected to a computer and the image doesn’t look
right, press the

Auto

button on the remote control.

Note: You must be projecting an image for this button to have any
effect. The

Auto

button works only with computer images.

Keystone
buttons