ZALMAN TNN 500AF - Manual (Page 24)

For AMD AMD64 Motherboards
Insert the Socket 754 AMD Nipples into the holes on the Retention Frame and fasten
the Socket 754 Back Plate .
TNN 500AF
3) Installing the Rear-mount Thermal Blocks
Caution)
1) Motherboards with a Northbridge that has integrated video capability is not recommended.
If such Northbridge is used, the Rear-mount Thermal Blocks MUST be installed.
2) Zalman Tech does not recommend using a motherboard with a fan on the Northbridge
Cooler. If the fan is removed, the Rear-mount Thermal Blocks MUST be installed.
3) If the CPU has a higher Thermal Design Power (TDP) rating than an Intel Prescott or an
AMD Athlon64 3500+, the Heatpipe Northbridge Cooler and a Rear-mount Thermal Block
MUST be installed to cool the Northbridge.
4) To use CPUs with a 100W or higher TDP rating, Rear-mount Thermal Blocks MUST be
installed (one for each FET) on the backside of the motherboard in-line with each FET.
5) If interference occurs between components or any problems appear, visit Zalman’s
website for a list of recommended motherboards, and replace before installation.
(www.zalman.co.kr/product/TNN500AF.html)
6) The Rear-mount Thermal Blocks are proprietary components of Zalman’s TNN series cases.
Do not use with other cases!
Installation for AMD AMD64 Socket 754 Motherboard