Zenith C27H26B - Manual (Page 24)

24
You can change the picture size by pressing the PICTURE SIZE
button on the remote control.
To fi ll the screen, the top and bottom edges are extended more
widely though the center of the picture remains near former ratio.
• If receiving a 4:3 format program, the image is displayed its
originally
formatted proportion.
This image will display the size of standard 16:9 with black bars at
the top and bottom.
• If receiving a 4:3 format program, the image is displayed with
black bars at the top and bottom and stretched wider.
NOTE:
If a fi xed black bar remains on the screen for long periods of time, the
image can become permanently engrained in the screen and cause
subtle but permanent ghost images. Never leave your TV on for an
extended period of time while displaying a stationary image(s).
The entire picture is uniformly enlarged—it is stretched the same
amount both wider and taller (retains its original proportion). The
right and left edges of the picture may be hidden.
Setting the picture size
You can view 480i format programs
in three picture sizes—4:3, 16:9
and ZOOM. Selecting the picture size
4:3 picture size
16:9 picture size
ZOOM picture size (for 16:9 format programs)
• If receiving an Analog signal, you can choose 4:3 or 16:9 picture size.
• If you are receiving a Digital signal in the 4:3 format, you are
restricted to the 4:3 picture size.
• It receiving a Digital signal of 16:9, you can choose 16:9 or ZOOM.
J33A0621B_EN.indb 24 J33A0621B_EN.indb 24 1/31/08 5:31:48 PM 1/31/08 5:31:48 PM