Zenith C27H26B - Manual (Page 15)

15
ENGLISH
Automatic memory tuning
To add or delete channels (ANALOG MODE)
Press MENU/ENTER. The menu screen will appear.
Press or to select
(SETUP)
menu, then press or to select
“AUTO CH MEMORY”.
Press . The TV will begin
memorizing all the channels
available in your area.
After fi nishing Analog Tuning,
Digital Tuning starts automatically.
• It may take from 15 minutes to 30
minutes to complete memorizing
digital cable channels. Depending on the reception condition,
a BAR display may not advance for several minutes.
Press ANALOG/DIGITAL to select the analog mode.
Press MENU/ENTER. The menu screen appears.
Press or to select
(OPTION)
menu, then press or to select
“ADD/DELETE”.
Press . The ADD/DELETE menu
appears.
Select the desired channel to be
memorized or deleted using
or .
Press or to select “ADD” or “DELETE”.
Repeat steps 5-6 for other channels you want to add or delete.
Press MENU/ENTER repeatedly until the menu screen is cleared.
Otherwise, press EXIT to return to the normal screen immediately.
1
2
3
1
2
3
4
5
6
7
8
NOTES:
• Memorizing channels is best
accomplished during evening
“PRIMETIME” hours, as more stations
are broadcasting digital signals.
Memorizing channels can only be
accomplished while a station is
broadcasting a digital signal to set
that channel into memory.
• If you are unsure of the digital channels
available in your area you may visit
www.antennaweb.org to receive a list
based on your address or zip code.
Should you require further assistance
you may call our toll-free customer
service line at 1-888-865-3026.
• New digital channels may be added
to your area periodically, it is
recommended that you perform the
“AUTO CH MEMORY” procedure
regularly.
Memorizing channels (continued)
J33A0621B_EN.indb 15 J33A0621B_EN.indb 15 1/31/08 5:31:13 PM 1/31/08 5:31:13 PM