Zenith C27H26B - Manual (Page 17)

17
ENGLISH
NOTES:
• If a channel is selected that is
not broadcasting, the sound will
automatically be muted.
• If a station being viewed stops
broadcasting, the TV will automatically
shut itself off after 15 minutes.
• It may take a few seconds for a
digital channel picture to appear on
screen after being selected.
1
2
3
4
TV operation
TV - VHF/UHF channels
CABLE - CABLE TV channels
To turn on the TV, press POWER.
Adjust the volume level by pressing VOL
+ or – . The volume level will be indicated
on the screen by green bars. As the
volume level increases, so do the number
of bars. If the volume decreases, the
number of green bars also decreases.
Set the TV/CABLE menu option to the
appropriate position (see page 14).
Press the Direct Channel Selection
buttons to select the channel.
To select analog channels
When the TV/CABLE menu option is
in the TV position, all channels can be
instantly selected by using two buttons.
(For example, to select channel 2, press
“0”, then “2”. If you press only “2”, channel selection will be delayed
for a few seconds.)
For channels 10 and above, press the 2 digits in order.
When the TV/CABLE menu option is in the CABLE position,
channels can be selected as follows:
1-9: Press 0 twice, then 1-9 as needed.
Example, to select channel 2, press 002.
10-12: Press 0, then remaining 2 digits.
Example, to select channel 12, press 012.
13-99: Press the 2 digits in order.
Example, to select channel 36, press 36.
100-125: Press the 3 digits in order.
Example, to select channel 120, press 120.
To select digital channels
Press the channel number in order.
When “–” is contained in the channel number, press the fi rst 3
digits, then press “–/DISPLAY”, followed by the remaining 3 digits.
(Example, to select channel 015-001, press 015 – 001.)
• If a channel is selected with only audio content, “AUDIO ONLY” will be
displayed on the screen.
• If a channel is selected with a weak digital signal, “DIGITAL CHANNEL
SIGNAL STRENGTH IS LOW” will be displayed on the screen.
If the digital channel has the same analog channel, you may be able to
watch the same channel with analog.
• If a channel is selected to which you have not subscribed, “DIGITAL
CHANNEL IS ENCRYPTED” will be displayed on the screen.
VHF/UHF/CABLE CHANNELS
TV CABLE
VHF
2-13 VHF
2-13
UHF
14-69
STD/HRC/IRC
14-36 (A) (W)
37-59 (AA) (WW)
60-85 (AAA) (ZZZ)
86-94 (86) (94)
95-99 (A-5) (A-1)
100-125 (100) (125)
01 (5A)
J33A0621B_EN.indb 17 J33A0621B_EN.indb 17 1/31/08 5:31:21 PM 1/31/08 5:31:21 PM