Xerox DocuColor 252 - Manual (Page 18)

6 Quick Connect Guide
The power indicator on the front panel lights up. The Windows
operating system starts, and the Spire CX260 splash screen appears.
Step 2: Default System and Network Settings
System and Network Settings
The following table lists the default system and network settings. These are
automatically taken from the Xerox DocuColor 242/252/260 printer/
copier settings.
Note: If you need to change any of the default settings, see the Creo Color
Server for the Xerox DocuColor 242/252/260 Printer/Copier Technical Manual
(document number 731-01024A-EN) or the Creo Color Server for the Xerox
DocuColor 242/252/260 Printer/Copier User Guide
(document number 731-01023A-EN).
Parameter Default Setting
Language English
Host name CX260 (the host name is taken from the
Computer Name you typed during the
Windows XP installation, see the Creo Color
Server for the Xerox DocuColor 242/252/260
Printer/Copier
Technical Manual for more
details).
Workgroup WORKGROUP
Date & Time US and Canada
Measurement Units Millimeters
IP address Enable DHCP: Yes
AppleTalk setup Enabled, Zone: Automatically detected