Xerox DocuColor 252 - Manual (Page 13)

How to Use This Guide 1
Engl
ish (EN)
Engli
sh
(EN
)
Quick Connect Guide
English (EN)
How to Use This Guide
This guide assists you with setting up the network and system
configuration settings for your Creo® Color Server (Spire CX260) for the
Xerox® DocuColor 242/252/260 printer/copier. In addition, this guide
provides steps for setting up a network printer on the Macintosh® and
Windows® client workstations.
The Spire CX260 was designed to connect to most networks with minimal
changes.
Step 1 describes the sequence for powering up the Spire CX260. Steps 2-5
provide instructions on how to setup and configure the Spire CX260 on
the network.
For more detailed information and procedures, see the Creo Color Server
for the Xerox DocuColor 242/252/260 Printer/Copier Technical Manual
(document number 731-01024A-EN) or the Creo Color Server for the Xerox
DocuColor 242/252/260 Printer/Copier User Guide (document number
731-01023A-EN).
Important: A Network Administrator is required in order to ensure that the
Spire CX260 is configured properly on the network. The Network Administrator
must supply the appropriate TCP/IP settings (IP address, subnet mask, gateway
address or DHCP settings).