Zonet Technology ZSR0104C Series - Manual (Page 22)

Page 15
a. Idle Time field: If the Idle Time was specified with non-zero number, ZSR0104C
SERIES router disconnects the PPTP session after there was no data traffic on WAN
interface within the specified “Idle Time” minutes.
b. Auto-reconnect field: Once there is any outgoing data traffic, the router automatically
re-establishes the PPTP session.
Click the button Next, the “LAN Setting” page, Figure 4 – 3, appears on the screen.
Figure 4 – 3
Step 4. The ” LAN Setting” page is used to configure ZSR0104C SERIES IP address of LAN
interface. You can assign the IP address from one of three private IP address groups
a. 10.x.x.x with subnet mask 255.0.0.0; x must be in range 0 to 255
b. 172.x.x.x with subnet mask 255.255.0.0; x must be in range 0 to 255
c. 192.168.x.x with subnet mask 255.255.255.0; x must be in range 0 to 255
Or a public IP address group with appropriated subnet mask.
Click the button Next, the “DHCP Setting” page, Figure 4 – 4, appears on the screen.
Figure 4 –4