Selecting a source, Bgv (back ground video) function – Yamaha RXV3000RDS User Manual

Page 28

Introduction

Preparations

Basic Operation

Advanced

Operation

Additional

Information

Appendix

Basic Playback

Selecting a Source

Select the source using the

INPUT

selector, or press one of the input buttons

on the remote control.

• The current source is indicated on the front panel display with an arrow.

• The current source name and input mode appear on the front panel display

and the video monitor for a few seconds.

Select this source:

To reproduce the signal
from this component.

DVD ........................................ DVD player
D-TV/LD ................................ LD player/Digital TV or TV
CABLE ................................... Cable TV
VCR 1 ..................................... Video deck 1
VCR 2/DVR ........................... Video deck 2 or Digital Video Recorder
V-AUX ................................... Other AV component
PHONO .................................. Turntable
CD ........................................... CD player
TUNER ................................... AM/FM tuner
MD/TAPE ............................... MD recorder/TAPE deck
CD-R ....................................... CD Recorder
SAT ......................................... Satellite tuner

Start playback (or select a broadcast station) on the source component.

• Refer to the operation instructions for the component.

Adjust

VOLUME

(or

VOLUME +/–

on the remote control).

Caution:

• If the power of the component connected to the

VCR 1

VCR 2/DVR

MD/TAPE

and

CD-R OUT

jacks is turned off, reproduced sound may be distorted or the

volume may be lowered. In these cases, turn on the component.

■

BGV (Back Ground Video) function

The BGV (Back Ground Video) function allows you to combine a video signal
from a video source with a sound signal from an audio source. (For example, you
can listen to classical music while you are watching a video.)

Using the remote control, select a source from the video group, then select a source
from the audio group. Use the input buttons on the remote control to make your
selections. The BGV function does not work if you select the sources using the

INPUT

selector on the front panel.

INPUT

D-TV/LD

DVD

CABLE

MD/TAPE

SAT

CD-R

VCR 1

TUNER

VCR2/DVR

V-AUX

PHONO

The selected source

VOLUME