Zanussi ZCM900X - Manual (Page 14)

14
SOMETHING NOT WORKING
If the appliance is not working correctly, please carry out the following checks, before contacting your local
Service Force Service Centre.
IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by
incorrect use or installation, a charge will be made even if the appliance is under guarantee.
Symptoms Solutions
1. No burner ignition
2. The gas ring burns unevenly
3. The oven does come on
4. Cooking results are not satisfactory
5. The oven smokes
6. The oven does not work
Check that:
·
Gas supply is completely open
·
The position of gas pipe is right
·
The burner is not wet
·
The burner cap and ring burner have been
replaced correctly after cleaning
Check that:
·
The main jet is not blocked and the ring
burner is clean of food particles
· The burner cap and ring burner have been
replaced correctly after cleaning
Check that:
·
a cooking function/temperature have been
selected;
Check that:
·
the thermostat is placed correctly;
·
the cooking time is adapted;
Check that:
·
the oven does not need cleaning;
·
the meal does not overflow;
·
there is no excessive fat / juice projection on
the oven sides.
Check that:
·
the appliance is not unplugged;
·
there is no power break.
·
the fuse connections are intact.
If after these checks, the appliance still does not operate correctly, contact your local Service Force
Centre. When you contact the Service Centre, they will need the following information:
1 Your name, address and postcode.
2 Your telephone number
3 Clear and concise details of the fault
4 The model and serial number (see rating plate*)
5 Date of purchase
*
The rating plate can be found on the front flap of the storage compartment.