Xerox 665E - Manual (Page 70)

DocuColor 8000/7000 Getting Started 7-2
7. Maintenance
Maintenance intervals
The scanner requires minimal maintenance by the operator.
However, it is essential that you perform these tasks when
indicated to ensure reliable operation and maximum product life.
Preventive maintenance intervals
To avoid any maintenance delays, ensure that you have the
necessary spare parts and cleaning supplies on hand.
Component Action Maintenance interval
Air Filter Replace
• Replace after 3,000 hours.
• The scanner software will notify you when
the Air Filter requires replacement.
Refer to the online Help (Advanced
Scanning) for step-by-step
instructions on replacing the filter.
Feed and Retard
Rollers Replace • Replace after 100,000 feeds.
• The scanner software will notify you when
the Feed and Retard Rollers require
replacement.
Refer to the online Help (Advanced
Scanning) for step-by-step
instructions on replacing the rollers.
Automatic
Document
Feeder Clean Clean the ADF whenever there is paper dust
visible in the feeder.
Refer to the online Help (Advanced
Scanning) for step-by-step
instructions on cleaning the ADF.
Document Glass Clean Clean daily or whenever specks are
noticeable in scanned images.
Refer to the online Help (Advanced
Scanning) for step-by-step
instructions on cleaning the
Document Glass.
Constant Velocity
Transport (CVT)
Ski Clean Clean whenever hole-punch marks are
noticeable in scanned images.
Refer to the online Help (Advanced
Scanning) for step-by-step
instructions on cleaning the CVT Ski.