Yamaha mLAN Driver - Manual (Page 6)

6
“Select Destinations” dialog box
This dialog box enables you to specify the mLAN devices and mLAN plugs that receive
mLAN data from the computer.
1 Device pop-up menus
These pop-up menus enable you to select mLAN devices to which data is transmit-
ted. The numbers on the left show the sequence numbers for audio and MIDI data.
When you select the destination mLAN device in one of the Device pop-up
menu while holding down the Option key, the same mLAN device will be
automatically selected in the subsequent Device pop-up menus. The num-
ber of the Device pop-up menus that have the same mLAN device selection
corresponds to the number of destination mLAN input plugs.
2 mLAN plug pop-up menus
These pop-up menus enable you to select the destination mLAN plugs for the mLAN
devices selected by the Device pop-up menus (
1 ).
Select the destination mLAN device while holding down the Option key to
assign multiple plugs simultaneously.
3 Disconnect All
Click this button to change all pop-up menus on the right to “(No Plug).” Click [OK]
while “(No Plug)” is selected for all these pop-up menus to disconnect all virtual
transmission (mLAN connections) from the computer to the mLAN devices.
A B
C D E F G