ZyXEL Communications P-660R-T1/T3 V2 - Manual (Page 10)

9
P-660R-T1/T3 v2 Quick Start Guide
B) Make sure you enter the password correctly (the field is
case sensitive). If you have forgotten the P-660R-T1/T3
v2’s password, use the RESET button. Press the button
in for about 10 seconds (or until the POWER light starts
to blink), then release it. It returns the P-660R-T1/T3 v2
to the factory defaults (IP address 192.168.1.1,
password 1234).
C) Make sure your computer’s IP address is in the same
subnet as the P-660R-T1/T3 v2’s LAN IP address (see
Set Up Your Computer’s IP Address section).
D) Ping the P-660R-T1/T3 v2 from a computer on the LAN.
Make sure your computer’s Ethernet adapter is installed
and functioning properly. In the computer, click Start,
(All) Programs, Accessories and then Command
Prompt. In the Command Prompt window, type "ping"
followed by the P-660R-T1/T3 v2’s LAN IP address
(192.168.1.1 is the default) and then press [ENTER] on
your keyboard. The P-660R-T1/T3 v2 should reply; if it
does not, see
Set Up Your Computer’s IP Address
section.
E) If the P-660R-T1/T3 v2’s IP address has changed, enter
the new one as the URL. If you have forgotten the new
IP address, use the RESET button (see step
B ).
F) Make sure you allow pop-up windows, JavaScripts and
Java permissions or set the Internet security level lower
than High in Internet Explorer (in Internet Explorer, click
Tools > Internet Options > Security > Custom Level...).
See the appendix in the User’s Guide for more
information.