beautypg.com

Warnings – Zanussi ELECTROLUX ZWT 8120 User Manual

Page 5

background image

warnings 5

Warnings

These warnings are for the safety of
you and others around you.
Please read these points carefully
before installing and using your ap-
pliance. Thank you for your atten-
tion.
Keep this user manual with your ap-
pliance. If the appliance is sold or gi-
ven to another person, please make
sure this user manual is included.
This way, the new user will have the
relevant operating instructions and
warnings.

General safety
• Do not modify or attempt to modify

this appliance. This would put your-
self in danger.

• Ensure that all coins, safety pins,

brooches, screws etc have been
removed before starting a washing
programme. If left in washing, they
can seriously damage the appliance.

• Use the amount of detergent recom-

mended in the paragraph “Using the
right amount of detergent”.

• Put small items together (socks, belts

etc.) in a small linen bag or pillow
case.

• Unplug and close inlet hose tap after

using appliance.

• Always disconnect the power supply

from the appliance before cleaning or
maintenance.

• Do not machine wash clothes with

ribbing, unfinished or torn material.

Installation
• Unpack or ask for the appliance to

be unpacked immediately upon arri-
val. Check the outside of the
appliance is not damaged in any way.
Put any complaints you may have in
writing on your copy of the delivery
receipt.

• The appliance must be untied before

connecting to power supply or using.
If all transit packaging is not comple-
tely removed, the appliance or sur-
rounding furniture could be
damaged.

• Connection to the water supply must

be carried out by a qualified plumber.

• If your domestic electrical circuit

needs adapting to allow the
appliance to be plugged in, use a
qualified electrician.

• Ensure that, after installation, the

power cable is not trapped under the
appliance.

• If the appliance is installed on carpe-

ted floor, ensure that the carpet does
not obstruct any ventilation ducts
located at the base of the appliance.

• The appliance must be equipped

with an earthed power plug which
conforms to regulations.

• Before connecting your appliance to

the power supply, carefully read the
instructions in the chapter entitled
“Electrical connection”.

• Replacing the power cable should

only be carried out by the After Sales
Service.

• The manufacturer cannot be held

responsible for any damage resulting
from incorrect installation.

This manual is related to the following products: