Zanussi ELECTROLUX ZWT 8120 - Manual (Page 19)

operating problems 19
The “Start/Pause”
pushbutton** flashes
red***: • the drainage filter is obstructed,
• the drain hose is blocked or bent,
• the drain hose is fixed too high (see “Installa-
tion” section).
• the drainage pump is blocked,
• the standpipe is blocked.
The “Start/Pause”
pushbutton** flashes
red***: • the water inlet tap is closed,
• the water supply has been cut off.
Softener runs directly into
the drum when filling the
dispenser box : • you have gone past the MAX indicator.
* Depending on model.
**On some models, the audible signals can sound.
*** After solving any problems, press the ‘Start/Pause’ pushbutton to restart the
interrupted programme.
Problems Causes