Zenoah PE2500H - Manual (Page 18)

❲ 18 ❳
9. Storage
■ STORING FOR LONG PERIOD
• To stop using your machine for a long
period, drain fuel from the fuel tank and
the carburetor before storing it. Fuel left
behind inside there for long period may
clog the carburetor and cause engine
troubles as no starting of engine or
reduced engine output.
• Leave the fuel cap loose during storage.
Over tightening may cause deform of
packing.
In case the pump is not used for more than 1
month, apply following maintenance
procedures before storing it in dry, clean
place:
1. Drain fuel from the fuel tank. (F12)
2. Fill the pump with water and start the
engine at a low speed until it stops with no
fuel.
3. Remove the spark plug and pour 1~2cc of
2 cycle engine oil into the cylinder, and
pull the starter rope for 2~3 times.
4. Refit the spark plug. Pull the starter rope
and return it when you feel a resistance.
5. Drain water from the pump completely,
and wipe off water on the pump using dry
cloth. (F13)
IMPORTANT
F12
F13