Yamaha PDM-4210E User Manual

Page 53

OPERATING INSTRUCTIONS (continued)

SETUP MENU (continued)

[During VIDEO signal input]

1 item is added to the Menu shown in the page .

Selected characters

Setup hint

Scart Output

TV Monitor

TV:AV4 (Scart) output will be fixed as TV signal output.
Monitor:AV4 (Scart) output can view the same image as displayed on
the main unit. It is possible to monitor only the composite video signal
from AV1, AV2, or AV3 input that is displayed on the screen at the time.
• If Descrambler is set to On, it will be fixed as TV automatically.

▼

Selected characters

Setup hint

Auto Tuning

Country

(Page1) (Page2) (Page3)

Select the country name using the

▼ ▲ SELECT buttons and press

OK button.
• If some required stations could not be preset using the auto tuning

function, select and preset the required station in the required
position using the manual tuning operation.

–

Press the OK button and it starts the auto tuning.

Manual Tuning

Position

1 2 3

••••••

199 AV00

Set the position number. This also can be set by

▼ ▲ PROGRAM

UP/DOWN buttons.

(C--)

(S--)

(--MHz)

–

Select the channel entry method. Enter a two digit channel number
(CH), a two digit S-band number, or a 3 digit frequency (MHz).

–

Use the 0-9 NUMBER buttons to enter a two digit number. If the number
is a standard channel number, the unit begins searching for the channel.

–

Use the 0-9 NUMBER buttons to enter a two digit number. If the number
is a standard S-band number, the unit begins searching for the channel.

–

Use the 0-9 NUMBER buttons to enter a three digit number. If the number
is a standard frequency, the unit begins searching for the channel.

Descrambler

Off On

Set this to Off normally. If it is set to On, the AV4 (Scart) terminal
operates as TV signal input, and the screen changes to display AV4
(Scart) input signal automatically.

Name

( :a letter)

This is used to input a 5 digit name for a TV station. After fixing the
cursor on the first digit, select a letter by

▼ ▲ SELECT buttons and

move to the next digit by ADJUST button. Press the OK button
again when finished.
• Selectable letters are “0”~`”9”, ”A”~`”Z”, “+”, “–”, ” ”(blank),

”,”(comma) and ”.”(period) .

Sound System

BG I DK

L' L

Select one of 5 different settings for the sound system.

Colour System

Auto PAL SECAM

NTSC3.58 NTSC4.43

Select one of 5 different settings for the colour system.

Skip

Off On

If this is set to On, the selected position will be skipped while
selecting positions by PROGRAM UP/DOWN buttons.
This is automatically set to On for non-broadcasting channels.

Off On

If this is set to On, it helps to reduce the noise interference visible on
the screen, especially in weaker signal reception areas.

Fine Tuning

Decreasing the frequency
data for the main tuner

Increasing the frequency
data for the main tuner.

After completing fine-tuning, press the RETURN button to exit this
mode.
• The variable range is -56 ~ +56.

Sort

(Position list

designated rows)

–

Move the cursor to the row of the channel you wish to change, and press
the OK button. The display characters change to green. Use the

▼ ▲

SELECT buttons to move the row to the disired location, and press the
OK button when you have finished. Press the RETURN button to exit.

Auto Off

Off On

If this is set to On, the power will be turned off when there is no
transmission signal and no operation for about 10 minutes in the TV
mode.

▼