Installation instructions connecting antenna – Yamaha PDM-4210E User Manual
Page 47
46
Monitor rear panel
Speaker (R)
Speaker (L)
20
18
16
14
12
10
8
6
4
2
21 19
17
15
13
11
9
7
5
3
1
antenna
EUROPE
U.K. ONLY
Make sure that the power switch of the monitor is turned off.
INSTALLATION INSTRUCTIONS
Connecting Antenna
Precautions when connecting the antenna
• Please use a coaxial cable which is not prone to interference to connect the antenna. Avoid using a parallel
flat feeder wire as interference may occur, causing reception to be unstable and stripe noise to appear on
the screen.
• Avoid using an indoor antenna as this may cause interference. Please use CATV net or outdoor antenna.
• Keep the power cord as far away from the antenna wire as possible.
If there is noise apparent in the picture of VHF-Low band channel, please use double-shielded cable (not
provided) for RF LEADS to reduce the noise.