Yamaha PDM-4210E - Manual (Page 28)

27
ENGLISH
Product specifications and designs are subject to change without notice.
PRODUCT SPECIFICATIONS
• The monitor takes at least 30 minutes to attain optimal picture quality.
Signal Input
RGB terminal (D-sub 15-pin connector)
1 2 3 4 5
6 7 8 9 10
11 12 13 14 15
• When different kinds of input signals are simultaneously input to
the monitor via a graphics board or the like, the monitor will
automatically select the signals in the following priority order:
*Even in the case of the recommended signals shown on the
following page, there may be instances when correct display is not
possible. In this case, use H/V separate sync, H/V composite sync.
Sync signal type Priority
H/V separate sync. 1
H/V composite sync. 2
sync.on Green * 3
28
Pin Input signal
1 R
2 G or sync on green
3 B
4 No connection
5 No connection
6 R.GND
7 G.GND
8 B.GND
9 No connection
10 GND
11 No connection
12 [SDA]
13 H. sync or H/V composite sync
14 V.sync. [V.CLK]
15 [SCL]
29
Panel
Net dimensions
(excluding pedestal)
Display
dimensions
Resolution
Approx. 42 inches (922 (H) x 522 (V) mm, diagonal 1059mm)
1024 (H) x 1024 (V) pixels
1030 (W) x 636 (H) x 91 (D) mm
Net weight
(excluding pedestal)
34.9kg
Ambient
conditions
Operating : 5˚C to 35˚C, Storage : 0˚C to 40˚C Temperature
Relative humidity Operating : 20% to 80%, Storage : 20% to 90% (non-condensing)
Input signals
RGB1 DVI input terminal (DVI-D)
RGB1 audio input terminal (3.5mm Stereo Mini Jack)
RGB2 analog RGB input terminal (D-sub 15-pin)
RGB2 audio input terminal (3.5mm Stereo Mini Jack)
Input terminals
0.7 V/1.0 Vp-p, analog RGB (Recommended Signal) Video signals
H/V separate, TTL level [2K Ω]
H/V composite, TTL level [2K Ω]
Sync on green, 0.3 Vp-p [75 Ω]
Sync signals
43 modes Recommended signal
Power supply AC100 - 240V, 50/60Hz
Power consumption/at standby 365W / <3W
Audio output 12W + 12W (6 Ω)
(RGB input)