X-Micro Tech. WL-1502 - Manual (Page 23)

USER’S MANUAL OF X-MICRO WLAN 11b BROADBAND ROUTER Version: 1.2
be assign a IP address from the range.
Show Client Click to open the Active DHCP Client Table window
that shows the active clients with their assigned IP
address, MAC address and time expired information.
802.1d Spanning Tree Select to enable or disable the IEEE 802.1d Spanning
Tree function from pull-down menu.
Clone MAC Address Fill in the MAC address that is the MAC address to be
cloned.
Clone MAC address is designed for your special
application that request the clients to register to a server
machine with one identified MAC address.
Since that all the clients will communicate outside world
through the X-Micro WLAN 11b Broadband Router, so
have the cloned MAC address set on the X-Micro WLAN
11b Broadband Router will solve the issue.
Apply Changes Click the Apply Changes button to complete the new
configuration setting.
Reset Click the Reset button to abort change and recover the
previous configuration setting.
3.3.7 WAN Interface Setup
This page is used to configure the parameters for wide area network that connects
to the WAN port of your X-Micro WLAN 11b Broadband Router. Here you may
change the setting for IP address, PPPoE and DNS, etc.
17