X-Micro Tech. WL-1502 - Manual (Page 22)

USER’S MANUAL OF X-MICRO WLAN 11b BROADBAND ROUTER Version: 1.2
Reset Click the Reset button to abort change and recover the
previous configuration setting.
3.3.6 LAN Interface Setup
This page is used to configure the parameters for local area network that connects
to the LAN ports of your X-Micro WLAN 11b Broadband Router. Here you may
change the setting for IP address, subnet mask, DHCP, etc.
Screenshot – LAN Interface Setup
Item D escription
IP Address Fill in the IP address of LAN interfaces of this X-Micro
WLAN 11b Broadband Router.
Subnet Mask Fill in the subnet mask of LAN interfaces of this
X-Micro WLAN 11b Broadband Router.
Default Gateway Fill in the default gateway for LAN interfaces out going
data packets.
DHCP Server Select to enable or disable the DHCP server function on
LAN interfaces from pull-down menu.
DHCP Client Range Fill in the start IP address and end IP address to allocate a
range of IP addresses; client with DHCP function set will
16