Zanussi ZT 6810 - Manual (Page 9)

Rinse aid
Rinse aid is automatically added during the last rinse,
ensuring thorough rinsing, spot and streak free drying.
The dispenser, which is positioned inside the door, holds
about 110 ml of rinse aid, which is sufficient for 16 - 40
dishwashing programmes, depending upon the dosage
setting.
Filling with rinse aid:
1. Open the container by turning the lid (A)
anticlockwise.
2. Add the rinse aid until the container is
completely full (approx. 110 ml). The indicator
(B) will be completely dark.
3. Top up the rinse aid when the rinse aid indicator
light on the control panel illuminates.
Ensure that the lid is closed after every
refill.
Do not put liquid detergent in the rinse aid department.
Clean up any rinse aid spilt during filling with an
absorbent cloth to avoid excess foaming during the next
wash.
Adjusting the dose
According to the finish and drying results obtained,
adjust the dose of rinse aid by means of the 6 position
selector (C) (position 1 minimum dosage, position 6
maximum dosage). (Start from position 3). Gradually
increase the dose if there are drops of water or lime
spots on the dishes after washing. Reduce it if there are
sticky whitish streaks on the dishes.
9 PFR02UK
BR01
A
m
ax
6 5 4 3
2
1
B
BR03
BR02
C
m
ax
6 5 4 3
2
1