Zanussi 534326 - Manual

ZANUSSI
P R O F E S S I O N A L
RACK TYPE DISHWASHERS
COMPACT RTCS 250
534326
Net weight - kg. 859 859 817 817
Total installed power - kW 31 31 30.9 30.9
water flow - liters/hr 300 300 300 300
boiler power - kW 16.5 16.5 16.5 16.5
boiler capacity - lt. 12 12 12 12
temperature - °C 80-90 80-90 80-90 80-90
Rinsing
pump power - kW 1.5 1.5 1.5 1.5
tank capacity - lt. 100 100 100 100
temperature - °C 55-65 55-65 55-65 55-65
1st wash
pump power - kW 1.0 1.0 1.0 1.0
tank capacity - lt. 100 100 100 100
temperature - °C <35 <35 <35 <35
Pre-wash
height/with open door 1771, 2119 1771, 2119 1771, 2119 1771, 2119
depth 884 884 884 884
width 2243 2243 2243 2243
External dimensions - mm
Insulation l l l l
Air emission - m³/h 180 180
Capacity baskets/h 1st/2nd speed 250, 180 250, 180 250, 180 250, 180
Capacity dishes/h 1st/2nd speed 4500, 3240 4500, 3240 4500, 3240 4500, 3240
N° of speeds 2 2 2 2
cold water inlet °C 15 15 15 15
hot water inlet °C 50 50 50 50
pressure min. , max. - bar 3, 7 3, 7 3, 7 3, 7
Water supply
Energy Saving Device incl. cond. unit l l
Feeding direction from RH to LH from LH to RH from RH to LH from LH to RH
Power supply Electric Electric Electric Electric
Model Electronic - A Electronic - A Electronic - B Electronic - B
RTCS250ERA
534324
RTCS250ELA
534325
RTCS250ERB
534326
RTCS250ELB
534327
CHARACTERISTICS MODELS
TECHNICAL DATA
RANGE
COMPOSITION
The Zanussi Dishwashing range is produced
for customers with the highest conceivable
demands for good efficiency, economy and
ergonomics for dishwashing operation. The
product range comprises glasswashers,
undercounter dishwashers, hood type
dishwashers, rack type dishwashers, flight
type dishwashers and pot and pan washers.
The rack type dishwasher range is designed
to be easily connected with the equipment
included in the Zanussi Handling System
range, to create a functional and ergonomic
dishwashing area. The rack type dishwasher
RTCS250 has a capacity up to 250 racks per
hour with 2 speeds, variable on installation.
The range consists of 4 electrically heated
models (steam on request), available with or
without Energy Saving Device (ESD).
FUNCTIONAL AND
CONSTRUCTION
FEATURES
� Solid 3mm square stainless steel
sub-frame with bolt-together construction that
can be delivered assembled or in modules to
be connected on site.
� All rear positioned water tubes in stainless
steel.
� Only one cable for electrical connection.
� Service from the front and from the side.
� Pre-arrangements for automatic detergent
dispenser, energy management device and
HACCP implementation (both basic as well
as integrated system).