Zanussi ZT 6810 - Manual (Page 17)

1. Check the filters
Ensure they are clean and properly positioned
(see cleaning instructions).
2. Press the On/Off
pushbutton
In the digital display will appear the number of
the last programme selected
3. Check that there is rinse
aid and salt
The indicator lights will illuminate if refilling is
necessary.
4. Load the dishes
Remove any scraps of food.
Pull the lower basket out and arrange the
saucepans, plates and cutlery in it.
Pull the upper basket out and arrange the plates,
saucers, glasses and cups etc. in it.
Slide the basket back into the machine.
5. Ensure that the spray
arms can rotate freely
6. Measure out detergent
Add the required amount of detergent into the
dispenser according to the "Washing
programmes" chart.
7. Close the detergent
dispenser lid
8. Set the programme
Press the programme selector button until the
number corresponding to the required
programme appears in the display.
If a programme with prewash has been selected
the SID indicator light will come on.
The following options may also be selected:
"Half load" by pressing the corresponding
button.
The indicator light of the selected basket will
come on.
Remember to load the dishes in the selected
basket.
"Economy drying / no drying" by pressing
the corresponding button. The indicator light of
the option selected will come on.
"Delay start".
9. Start the programme
Close the dishwasher door. The programme
starts. An audible signal will inform you of this.
If a delay start has been selected, the
countdown starts when the door is closed.
The number of hours to go before the
programme starts will be indicated in the digital
display.
Once the delay set has elapsed, the programme
starts automatically.
Operating sequence
17 POS11UK