Zenoah BK3420FL-EZ - Manual (Page 4)

4
■ BEFORE USING THE MACHINE
a. Read this owner's manual carefully to
understand how to operate this unit properly.
b. This product has been designed for use in
trimming grass, and it should never be used for
any other purpose since doing so could result
in unforeseen accidents and injuries occurring.
c. You should never use this product when under
the influence of alcohol, when suffering from
exhaustion or lack of sleep, when suffering
from drowsiness as a result of having taken
cold medicine, or at any other time when a
possibility exists that your judgment might be
impaired or that you might not be able to
operate the product properly and in a safe
manner.
d. Avoid running the engine indoors. The exhaust
gases contain harmful carbon monoxide.
e. Never use your product under circumstances
like those described below:
1. When the ground is slippery or when other
conditions exist which might make it not
possible to maintain a steady posture while
using the product.
2. At night, at times of heavy fog, or at any
other times when your field of vision might
be limited and it would be difficult to gain a
clear view of the area.
3. During rain storms, during lightning storms,
at times of strong or gale-force winds, or at
any other times when weather conditions
might make it unsafe to use this product.
f. When using this product for the first time,
before beginning actual work, learn to handling
the product from skilled worker.
g. Lack of sleep, tiredness, or physical exhaustion
results in lower attention spans, and this in turn
leads to accidents and injury.
Limit the amount of time over which the product
is to be used continuously to somewhere
around 30~40 minutes per session, and take
10~20 minutes of rest between work sessions.
Also try to keep the total amount of work
performed in a single day under 2 hours or
less.
h. Be sure to keep this manual handy so that you
may refer to it later whenever any questions
arise.
i. Always be sure to include this manual when
selling, lending, or otherwise transferring the
ownership of this product.
j. Never allow children or anyone unable to fully
understand the directions given in this manual
to use this product.
■ WORKING GEAR AND CLOTHING
a. When using your product, you should wear
proper clothing and protective equipment as
follows.
(1) Helmet
(2) Protection goggles or face protector
(3) Thick work gloves
(4) Non-slip-sole work boots
(5) Ear protectors
b. And you should carry with you things as
follows.
1. Attached tools and files
2. Properly reserved fuel
3. Spare blade
4. Things to notify your working area (Rope,
warning signs)
3. Safety Precautions