Zenoah BK3420FL-EZ - Manual (Page 13)

13
6. Operation
OP1
■ REFUELING
• Refuel the fuel tank in a flat place outdoors. Avoid
smoking or bringing any flame or spark near the
fuel, and stub out any cigarette.
• When refueling the fuel tank while using this
machine, make sure to stop the engine and allow it
to cool before refueling the fuel tank.
• Make sure to tighten the fuel-tank cap firmly.
• Wipe up all fuel spills with a dry cloth before
starting the engine.
Fill the fuel tank to roughly 80% of its capacity.
If filled too full, the fuel may leak from the tank cap while
using this machine.
1. Place the brushcutter to be refueled in a flat place
outdoors, and make sure it is stable.
2. Unscrew the fuel-tank cap a little, and allow the
difference of atmospheric pressure between the inside
and outside of the fuel tank to equalize.
3. Remove the fuel-tank cap, and fill fuel little by little up
to roughly 80%.
4. After filling the fuel, close the fuel-tank cap tightly, and
make sure that the fuel does not leak.
(1) Tank cap
(2) Fuel tank
IMPORTANT
WARNING