Yamaha RX-V2090 - Manual (Page 14)

14
CONNECTING TO ROOM 2 EQUIPMENT
With the Room 2 Remote transmitter you can select a different sound and video source for a second room.
To use the multi-room functions of this unit you need the following additional,optional products:
• An infrared signal receiver for the second room. (WCX-10)
• Master Zone Controller (MCX-10)
• An infrared emitter in the main room. (IRX-10/20)
This emitter transmits the infrared signals from the Room 2 Remote transmitter in the second room to the other
components in the main rooms (for example, the remote for your laserdisc player).
• An amplifier and speakers for the second room.
• A video monitor for the second room.
Note
Since there are so many ways to connect and use your RX-V2090 in a multi-room installation, we recommend that
you consult with a custom installation specialist for the Room 2 connections which will best meet your require-
ments.
Sample Room 2 connections:
Main Room Second Room
Infrared emitter
(IRX-10/20)
RX-V2090
Infrared signal
receiver (WCX-10)
Amplifier
Room 2
Remote
Master Zone
Controller MCX-10
Cassette deck, etc
*
Video monitor
REMOTE CONTROL IN
ROOM 2 VIDEO OUT
ROOM2 AUDIO PREOUT
MCX-10
* Some Yamaha models are able to connect directly to the RX-V2090 via the REMOTE OUT terminals. If you own
these products, the use of an infrared emitter may not be necessary.
CAUTION
In some cases, adjustments made using the Room 2 Remote transmitter may not be evident on this unit.
For example, if both the main room and second room are set to the tuner, it is possible for the person in the
second room to change the station. This may be a problem, especially when you are taping a source without
directly monitoring it.
Using the Remote Transmitters
If you use the Room 2 Remote transmitter (the transmitter for the second room) in the main room, the input
selector keys of this remote affect the settings in the second room, not the main room. The other keys on the
transmitter work the same in both the main room and the second room.
If you use the Main Remote transmitter (the transmitter for the main room) in the second room, the keys that also
appear on the Room 2 Remote transmitter work except the input selector keys.
The indicator information:
1 Lights up momentarily when the Room 2 Remote transmitter is used in
the main room.
2 Lights up momentarily when the Room 2 Remote transmitter is used in
the second room.
ROOM 2
ROOM 2
CONTROL
ROOM 2 1
2