11mbps wireless internet broadband router, 6 configuring your pcs to connect to the router – Xerox 2314 User Manual

Page 47

Text mode
Original mode

11Mbps Wireless Internet Broadband Router

3.6 Configuring your PCs to Connect to the Router

Before you start to configure other PCs to accept the IP address that your Router will
provide, make sure the network card or adapter has been successfully installed into
each PC you planed to connect to the Router. Complete the following steps to
configure your PC:

Step 1 Click the Start button, select Setting, then Control Panel.

Step 2 Double Click the Network and Dial-up icon.

Step 3 Highlight the Local Area Connection and click the button of Properties.

Step 4 In the Configuration window, select the TCP/IP protocol line that has been

associated with your network card or adapter. (See Figure 3-36)

Figure 3-36 Network Box Screen