Zanussi TDS 483 EW - Manual (Page 6)

6
DRYING
COOL TUMBLING
END OF PROGRAMME
CLEAN FILTER NOW
FLASHING-DOOR AJAR
START BUZZER
O F F
COTTON LINEN
B C D A
STORE DRY IRON DRY STORE DRY EXTRA DRY
SYNTHETICS
L O W
TEMP
T D S 4 8 3 E W A U T O R E V E R S E IMPORTANT: PLEASE READ THE INSTRUCTION BOOK BEFORE USING THIS APPLIANCE
1 2 3 4 567 8 9 10
The Control Panel
1 Programme Chart
This will help you to select the correct programme for
drying.
2 Low Temperature Button
Press this button to reduce the temperature when
drying particularly delicate items.
To be used when drying synthetics with timed
programme.
3 Buzzer Off Button
During the anti-crease phase, the buzzer will sound
intermittently. Depress this button to switch off this
function.
4 Start Button
Press this button to start the selected drying
programme.
If the door is opened during drying programme, this
button has to be depressed after closing the door to
re-start the programme.
5 Drying Light
This light indicates that the machine is performing
the drying phase.
6 Cool Tumbling Light
This light will illuminate when the cooling phase is in
operation. This starts 9 minutes before the end of
drying to prevent any creasing or crumpling of
fabrics.
7 End of programme & Clean
Filter Light
This light comes on at the end of the drying
programme and remains alight until the door is
opened or the selector dial is turned to “0”.
The filter must be cleaned at the end of each
drying cycle.
8 Door Ajar Light
This light flashes when the door is open, or not closed
properly.
9 Mains-On Light
This lights up by selecting the drying programme and
goes out when the programme selector dial is turned
to “0”.
10 Programme Selector Dial
To set the machine to the selected programme or
time, turn the dial until the letter or the time you want
coincides exactly with the pointer.