When drying is completed, Anticrease phase – Zanussi TDS 483 EW User Manual
Page 10

10
5. When drying is completed
The machine stops automatically.
Release the button(s).
Turn the selector dial to “0”, the mains-on light goes
out.
Anticrease phase
If you do not remove the laundry at the end of the
programme, the machine will automatically carry out
an “anticrease” phase for approx 30 mins. During this
period the drum will rotate at regular intervals to
avoid creasing and the buzzer will sound for 1 second
every 10 seconds, unless you have depressed the
BUZZER OFF button.
Clean the filter after every drying programme.
A clean filter ensures correct functioning of the
appliance.
See also other documents in the category Zanussi Dryers:
- TCS 603 LT (13 pages)
- Z 300 CDP (14 pages)
- ZTH485 (56 pages)
- TDE 4234 W (19 pages)
- TDE 4224 (16 pages)
- TD 4213 W (17 pages)
- ZDC46130W (25 pages)
- TD 4112 W (17 pages)
- TC 485 W (18 pages)
- ZDB 5377 W (19 pages)
- TDE 4235 W (19 pages)
- TD 4212 W (17 pages)
- TC 482 W (18 pages)
- ZDC 47100 S (26 pages)
- TC 491 D (18 pages)
- TC 7114 W (16 pages)
- TCE 7124 W (16 pages)
- ZDC 67550W (31 pages)
- ZDC37100W (28 pages)
- ZDC 5350 W (20 pages)
- TDE 4224 W (21 pages)
- Clothes Dryer (20 pages)
- ZDE 47100W (16 pages)
- TC 7102 S (16 pages)
- 136905611-00-02092008 (26 pages)
- TDS 473E (14 pages)
- TCS 683 LT (14 pages)
- U33109 ZDE 26000 W (24 pages)
- TDS 383 W (20 pages)
- TC 481 W (18 pages)
- TC 7103 S (16 pages)
- TDS 372T (15 pages)
- TDS 382 W (20 pages)
- TCS 675 EW (19 pages)
- TC 180 (20 pages)
- TCS 584 EW (16 pages)
- ZDE 57140W (31 pages)
- TC 7103 W (16 pages)
- TC 484 W (18 pages)
- ZDC 5370 W (19 pages)
- TDS 280 W (18 pages)
- TCE7227W (17 pages)
- TCE 7276 W (18 pages)
- TCS 674 E (15 pages)
- TCE 7127 W (17 pages)