Zanussi ZCE 650 - Manual (Page 13)

13
How to make the oven switch
on and off automatically
The functions “Cook Time” and “End time” can be used
simultaneously to set the oven to switch on and off
automatically at a later time.
1. Set the duration time with the “Cook Time” function
(carry out the cooking duration setting as described
in the previous chapter). Then, press button “Time”:
the display will show the programmed setting.
2. Press button “Time” repeatedly to select the “End
Time” function. The relevant indicator will flash.
3. Turn the time/temperature control knob to to set
the end of cooking time.
4. After the setting is carried out, wait for 5 seconds.
The relevant indicators will come on and the display
will show the set temperature. The oven will switch
on and off according to the set programmes and an
acoustic alarm will be heard when cooking time is
over.
5. To switch off the acoustic alarm, turn the oven function
control knob to the “OFF” position (0).
If you press a button other than the knob, the alarm
will switch off and the display will show “--- °C”. This
means that the oven cannot be operated.
Turn the oven control knob to the “OFF” position (0)
to reset the oven.
The display will revert to the time of day.
Once you have programmed the oven, you can
check both the cooking duration and end of
cooking time by pressing the “Time” button.
Set the “Cook Time” function to zero to cancel
the programme.
It is not possible to set the “Cook Time” and “End
Time” functions when the oven is off.