ZyXEL Communications Network Device 56K - Manual (Page 7)

ZyXEL Omni 56K USB Modem Quick Start Guide
7
3. TCP/IP Setup
Windows 95/98/Me
Installing TCP/IP Components
1. Click Start, Settings, Control Panel and double-click
the Network icon.
2. The Network window Configuration tab displays a
list of installed components.
To install TCP/IP:
a. In the Network window, click Add.
b. Select Protocol and then click Add.
c. Select Microsoft from the list of manufacturers.
d. Select TCP/IP from the list of network protocols and
then click OK.
Configuring TCP/IP
1. In the Network window Configuration tab, select
your network adapter’s TCP/IP entry and click
Properties.
2. Click the IP Address tab. Click Obtain an IP
address automatically.
3. Click the DNS Configuration tab. Select Disable
DNS.
4. Click the Gateway tab. Highlight any installed
gateways and click Remove until there are none
listed.
5. Click OK to save and close the TCP/IP Properties
window.
6. Click OK to close the Network window.
7. Turn on your Prestige and restart your computer when
prompted. Insert the Windows CD if prompted.