Yamaha HTR-5940 - Manual (Page 125)

E-
10
USING THE SUBWOOFER (YST-SW015)
Ⅵ Controls and their functions
1
Power indicator
Lights up in green while the subwoofer is on.
Lights up in red while the subwoofer is set in the
standby mode by the operation of the automatic power-
switching function.
Goes off when the subwoofer is set in the standby
mode.
2
STANDBY/ON button
Press this button to turn on the power when the
POWER (
7 ) switch is set in the ON position. (The
power indicator lights up in green.)
Press again to set the subwoofer in the standby mode.
(The power indicator goes off.)
Standby mode
The subwoofer is still using a small amount of power
in this mode.
3
B.A.S.S. (Bass Action Selector System) button
When this button is pressed in to the MUSIC position,
the bass sound in audio software is well reproduced.
By pressing the button again so that it pops out at the
MOVIE position, the bass sound in video software is
well reproduced.
INPUT
/MONO
OFF LOW HIGH
AUTO STANDBY
NORM REV
PHASE
POWER
ON
OFF
110V–120V 220V–240V VOLTAGE SELECTOR
SUBWOOFER SYSTEM YST-SW015
STANDBY/ON B.A.S.S. HIGH CUT 50–150Hz VOLUME 0–10
INPUT
/MONO
OFF LOW HIGH
AUTO
STANDBY
NORM REV
PHASE
SUBWOOFER SYSTEM YST-SW015
STANDBY/ON B.A.S.S. HIGH CUT 50–150Hz VOLUME 0–10
POWER
ON
OFF
110V–120V 220V–240V
VOLTAGE
SELECTOR
2 4 5 1 3
9 8 0
7
6
Rear panel (General model)
Front panel
Port
4
HIGH CUT control
Adjusts the high frequency cut off point.
Frequencies higher than the frequency selected by this
control are all cut off (and no output).
* One graduation of this control represents 10 Hz.
5
VOLUME control
Adjusts the volume level. Turn the control clockwise to
increase the volume, and counterclockwise to
decrease the volume.
6
VOLTAGE SELECTOR switch
(For China, Korean and General models)
If the preset setting of the switch is incorrect, set the
switch to the proper voltage range (220V-240V or
110V-120V) of your area.
Consult your dealer if you are unsure of the correct
setting.
WARNING
Be sure to unplug the subwoofer before setting the
VOLTAGE SELECTOR switch correctly.
MOVIE MUSIC
50 Hz
60 Hz
70 Hz
80 Hz
90 Hz
140 Hz
130 Hz
120 Hz
110 Hz
100 Hz
150 Hz
NS-P430-436 (UB) 03.2.28, 7:03 PM 10