beautypg.com

Video setup menu – Yamaha DVX-S301 User Manual

Page 44

background image

DVD SETUP MENU OPTIONS

39

ON-SCREEN MENU

5

Eng

lish

Video setup menu

1

In DVD/CD mode, press SET UP.

2

Press / to select [VIDEO SETUP PAGE] icon.

3

Press ENTER (OK) to confirm.

TV type

This menu contains the options for selecting the color
system that matches the connected TV. For details, see
“Selecting the TV type” on page 24.

TV display

This menu contains the options for matching the aspect
ratio of the receiver to the connected TV. For details, see
“Setting the TV display” on page 25.

Progressive function

The progressive scan display present 60 complete frames
per seconds, rather than 30 frames per second of interlaced
scanning (ordinary normal TV system). With nearly
double the number of lines, progressive scan offers higher
picture resolution and eliminates bothersome motion
artifacts those jagged edge on moving objects.

Before enabling the progressive scan function, you must
ensure:
1

Turn on your TV progressive scan function (refer to
your TV owner’s manual).

2

You have connected the DVD receiver to your TV
using Y P

B

P

R

(see “Connecting a TV” on page 19).

1

In [VIDEO SETUP PAGE], press

/

to

highlight [PROGRESSIVE], then press .

OFF
Select this to disable progressive scan function.

ON
Select this to enable progressive scan function.

2

Press

/

to select a setting and press ENTER

(OK)

to confirm.

Follow the instructions shown on the TV to

confirm the selection (if any).

If a blank/distorted TV screen appears, wait for 15

seconds for auto recovery to activate.

If you are changing the setting to

OFF

by using the remote

control, follow the procedure below.

1

Open the disc tray.

2

Press ,

then press ANGLE.

Picture settings

This receiver comes with three predefined sets of picture
color settings and one personal setting that you can define
yourself.

1

In [VIDEO SETUP PAGE], press

/

to

highlight [PICTURE SETTING], then press .

STANDARD
Select this for the standard picture setting.

BRIGHT
Select this to make the TV picture brighter.

SOFT
Select this to make the TV picture softer.

PERSONAL
Select this to personalize your picture color by
adjusting the brightness, contrast, tint and color
(saturation).

2

Press

/

to select a setting and press ENTER

(OK)

to confirm.

3

If you selected [PERSONAL], proceed to step 4.

The [PERSONAL PICTURE SETUP] menu

appears.

Note

TV TYPE

TV DISPLAY

PROGRESSIVE

PICTURE SETTING

COMPONENT

BLACK LEVEL

CLOSED CAPTION

VIDEO SETUP PAGE

Note

Note

This manual is related to the following products: