beautypg.com

Setting a tv, 24 ■ setting a tv – Yamaha DVX-S301 User Manual

Page 29

background image

GETTING STARTED

24

Setting a TV

Make sure you have completed all the necessary connections
(see “Connecting a TV” on page 19).

1

Press DVD/CD.

DVD/CD

” appears in the display panel.

2

Turn on the TV and set to the correct video-in channel.

You should see the background screen on the TV.

Usually this channel is between the lowest and

highest channels and may be called FRONT, A/V IN
or VIDEO. See your TV manual for more details.

Or, you may go to channel 1 on your TV, then press

the Channel down button repeatedly until you see the
Video In channel.

Or, the TV remote control may have a button or

switch that chooses different video modes.

Selecting the TV type

In order for a DVD to play on this DVD receiver, the color
system of the DVD, the TV and the DVD receiver should
match. Before changing the TV system, determine the
color system of your TV.

1

In DVD/CD mode, press SET UP.

2

Press repeatedly to select [VIDEO SETUP PAGE].

3

Press

/

to highlight [TV TYPE], then press

.

4

Press

/

to highlight one of the options below:

PAL

– Select this if the connected TV has the PAL

color system. It will change the video signal of an
NTSC disc and output it to PAL format.
NTSC

– Select this if the connected TV has the NTSC

color system. It will change the video signal of a PAL
disc and output it to NTSC format.
MULTI

– Select this if the connected TV is compatible

with both NTSC and PAL (multisystem). The output
format will be in accordance with the video signal of
the disc.

5

Select a setting and press ENTER (OK).

Follow the instructions shown on the TV to confirm

the selection (if any).

If a blank/distorted TV screen appears, wait for 15

seconds for auto recovery to activate.

When you are selecting color system by using the remote
control, follow the procedure below.

1

Open the disc tray.

2

Press ,

then

press

AUDIO

.

If the default setting of the color system is NTSC,

it will be changed to PAL.

If the default setting of the color system is PAL, it

will be changed to NTSC.

Note

TV TYPE

TV DISPLAY

PROGRESSIVE

PICTURE SETTING

COMPONENT

PAL

NTSC

MULTI

VIDEO SETUP PAGE

Note

This manual is related to the following products: