Speaker output levels, Before you begin, English – Yamaha DSP-AX1 User Manual
Page 29
27
English
Before You Begin
1
1
Set
BASS
,
TREBLE
and
BALANCE
on the front panel to “0” (the
center position) and turn off
BASS EXTENSION
.
2
2
Sit in the main listening position and set
PARAMETER/SET
MENU
on the remote control to
PARAMETER
.
3
3
Set
10KEY/DSP
on the remote control to
DSP
and press
/ DTS
SUR
.
4
4
Press
TEST
on the remote control once or twice to select the test
you want.
• Select “TEST DOLBY SUR.” to match the output levels of the Center, Rear
Center and left and right Rear speakers to the left and right Main speakers.
• Select “TEST DSP” to match the output levels of the Front Effect speakers
to the Main speakers.
Speaker Output Levels
This section explains how to set the speaker output levels using the test tone generator. The Dolby Surround test is for balancing the output
levels of the six speakers required for surround sound systems. The DSP test is for balancing the Front Effect speakers with the Main
speakers for the DSP sound field programs.
BASS
TREBLE
5
5
4
4
3
3
2
2
1
1
0
+
–
5
5
4
4
3
3
2
2
1
1
0
+
–
5
5
4
4
3
3
2
2
1
1
0
R
L
BALANCE
10KEY DSP
PARAMETER
SET MENU