ZyXEL Communications ZYWALL 100 User Manual

Page 3

1. Click

Start and then Run. In the Run window, type "winipcfg" and then click OK to open the IP Configuration

window.

2. Select your network adapter. You should see your computer's IP address, subnet mask and default gateway.

Setting up Your Window s NT/2000/XP Computer

Configuring TCP/IP

1. Click

Start, Settings, Network and Dial-up Connections and right-click Local Area Connection or the connection you

want to configure and click Properties. For Windows XP, click start, Control Panel, Network and Internet
Connections and then Network Connections. Right-click the network connection you want to configure and then click
Properties.

2. Select

Internet Protocol (TCP/IP) (under the General tab in Win XP) and click Properties.

3. The

Internet Protocol TCP/IP Properties window opens. Click Obtain an IP address automatically.

4. Click

Obtain DNS server automatically.

5. Click

Advanced, IP Settings tab and remove any installed gateways, then click OK.

6. Click

OK to save and close the Internet Protocol (TCP/IP) Properties window.

7. Click

OK to close the Local Area Connection Properties window.

8. Turn on your ZyWALL and restart your computer (if prompted).

Verifying TCP/IP Properties

1. Click

Start, Programs, Accessories and then Command Prompt.

2. In

the

Command Prompt window, type "ipconfig" and then press ENTER. The window displays information about

your IP address, subnet mask and default gateway.

Setting up Your Macintosh Computer

Configuring TCP/IP Properties

1. Click

the

Apple menu, Control Panel and double-click TCP/IP to open the TCP/IP Control Panel.

2. Select

Ethernet from the Connect via list.

3. Select

Using DHCP Server from the Configure list.

4. Close

the

TCP/IP Control Panel.

5. Click

Save if prompted, to save changes to your configuration.

6. Turn on your ZyWALL and restart your computer (if prompted).

Verifying TCP/IP Properties

Check your TCP/IP properties in the TCP/IP Control Panel.

Accessing the ZyWALL

1. Web

configurator

2. SMT (System Management Terminal). Access the SMT via: