Environmental concerns – Zanussi ZBF6124A User Manual

Page 12

Push the part (Hc) on the

part (Ha).

8 mm

Open the appliance door

and the kitchen furniture

door at an angle of 90°.

Insert the small square (Hb)

into guide (Ha).

Put together the appliance

door and the furniture door

and mark the holes.

8 mm

Remove the brackets and

mark a distance of 8 mm

from the outer edge of the

door where the nail must be

fitted (K).

Place the small square on

the guide again and fix it

with the screws supplied.

Align the kitchen furniture

door and the appliance

door by adjusting the part

Hb.

Press the part (Hd) on the

part (Hb).

Do a final check to make sure that:
• All screws are tightened.
• The magnetic sealing strip is attached tightly to the

cabinet.

Important! If the ambient temperature is low (for example,

in the Winter), the size of the gasket decreases. The size

of the gasket increases when the ambient temperature

increases.

Environmental concerns

The symbol on the product or on its packaging

indicates that this product may not be treated as

household waste. Instead it should be taken to the

appropriate collection point for the recycling of electrical

and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential

negative consequences for the environment and human

health, which could otherwise be caused by inappropriate

waste handling of this product. For more detailed

information about recycling of this product, please

contact your local council, your household waste disposal

service or the shop where you purchased the product.