Door reversibility, Ventilation requirements, Installing the appliance – Zanussi ZBF6124A User Manual
Page 10
Door reversibility
The door of the appliance
opens to the right. If you
want to open the door to the
left, do these steps before
you install the appliance:
• Loosen the upper pin
and remove the spacer.
• Remove the upper pin
and the door.
• Remove the door.
• Loosen the lower pin.
On the opposite side:
• Install the lower pin.
• Install the door.
• Tighten the spacer and
tighten the upper pin.
Ventilation requirements
The airflow behind the ap-
pliance must be sufficient.
50 mm
min.
200 cm
2
min.
200 cm
2
Installing the appliance
Caution! Make sure that the mains cable can move
freely.
Do the following steps:
10
See also other documents in the category Zanussi Freezers:
- ZU 7120 F (20 pages)
- ZCF 310 (11 pages)
- ZU 9120 F (20 pages)
- ZBF 11420 SA (40 pages)
- ZQF 11430 DA (40 pages)
- ZFC 11 JE (16 pages)
- ZFC 11 JE (12 pages)
- ZFC 26 JE (20 pages)
- RS13FW2F (3 pages)
- ZFC 389 S (6 pages)
- 113182 (4 pages)
- BCF180DA (5 pages)
- ZBF 6114 (20 pages)
- IMF35A (2 pages)
- CIM50A3 (5 pages)
- CIM29A3 (2 pages)
- U28059 ZFC 177 C (16 pages)
- TRF183AE (4 pages)
- ZRB 2630 W (20 pages)
- TRF132A (4 pages)
- Z1921/8 FFA (20 pages)
- 726690 (5 pages)
- CIM67A (5 pages)
- ZFC 35 SI (12 pages)
- ZUT 6246 (16 pages)
- ZEC 30 (15 pages)
- ZEF 90 W (16 pages)
- U30456 ZFC 50 JC (8 pages)
- ZRB 2725 W (20 pages)
- RCSF3M22 (4 pages)
- ZFC 632 WAP (8 pages)
- ZFC 321 WB (12 pages)
- CIM143WS3 (2 pages)
- ZV 45 RAL (16 pages)
- ZERT 2170 (16 pages)
- IMF250AB20 (2 pages)
- 728636 (4 pages)
- ZEF 55 W (16 pages)
- ZRB 2825 W (20 pages)
- ZRD 1843 (20 pages)
- ZUT 125W (20 pages)
- ZCF 94 C (16 pages)
- ZRB 2530 S (20 pages)
- ZUC 053W (16 pages)
- ZNB 404 W (24 pages)