Zenoah EBZ8001 User Manual
Page 3
GB-3
G
B
EBZ8001
1. Parts location
SAFETY FIRST
Instructions contained in warnings within this manual marked
with a
symbol concern critical points which must be taken
into consideration to prevent possible serious bodily injury, and
for this reason you are requested to read all such instructions
carefully and follow them without fail.
WARNINGS IN THE MANUAL
WARNING
This mark indicates instructions, which must be followed in or-
der to prevent accidents, which could lead to serious bodily in-
jury or death.
IMPORTANT
This mark indicates instructions, which must be followed, or it
leads to mechanical failure, breakdown, or damage.
NOTE
This mark indicates hints or directions useful in the use of the
product.
Contents
1.
Parts location .................................................. 3
2.
Specifications ................................................. 4
3.
Warning labels on the machine ...................... 4
4.
Symbols on the machine ................................ 4
5.
For safe operation ........................................... 5
6.
Set up ............................................................. 8
7.
Fuel ................................................................. 9
8.
Operation ...................................................... 10
9.
Maintenance ................................................. 11
10.
Storage ......................................................... 13
11.
Disposal ........................................................ 13
12.
Troubleshooting guide .................................. 14
1. Frame
2. Harness
3. Engine Cover
4. Volute Case
5. Net
6. Air Cleaner
7. Recoil Starter
8. Fuel Tank
9. Spark Plug Cap
10. Shock Absorber (Rubber)
11. Shock Absorber (Rubber)
12. Choke Lever
13. Control handle
14. Ignition Switch
15. Throttle Lever
16. Elbow
17. Clamp (Large)
18. Flexible hose
19. Clamp (Small)
20. Swivel joint
21. Clamp (for Cabling)
22. Straight pipe
23. Pipe end
24. Owner’s manual
25. Plug wrench (Hexagon
socket S16/S19) + Screw
driver (Torx T-27)
26. Spanner (S8/S10)