Zenoah EBZ8001 - Manual (Page 2)

GB-2
EBZ8001
APPROVAL NUMBER OF CE EXHAUST EMISSION REGULATION (2002/88/EC)
e13*97/68SH3G3*2002/88*0106*03
EXPLANATION OF SYMBOLS AND SAFETY WARNINGS
WARNING!!!
RISK OF DAMAGING HEARING
Wear head, eye and ear protection.
DESIGNATION : BLOWER (Back-pack garden blower)
MANUFACTURER : Husqvarna Zenoah Co., Ltd.
MODEL : EBZ8001
SERIAL NUMBERS DATING : 2010 and onwards
(The year is clearly stated on the rating plate,
followed by the serial number)
This declaration conform with :
DIRECTIVE 2006/42/EC of 17 May, 2006
(The following standards have been applied: ISO 12100-1,-2, FprEN 15503)
DIRECTIVE 2004/108/EC of December 15, 2004
(The following standards have been applied: EN 61000-6-1, EN 55012 (CISPR 12))
DIRECTIVE 2000/14/EC of 8 May, 2000
conformity assessment procedure followed ANNEX V
(The following standards have been applied: ISO 11094)
DIRECTIVE 97/68/EC of December 16, 1997
2002/88/EC of December 9, 2002
Date : 29 December 2009
Signature :
Kiyoshi Honda
General Manager, Development Center
Authorised representative :
Husqvarna AB
SE-561 82 Huskvarna, Sweden
Person authorised to compile the technical file :
Bo R Jonsson
SE-561 82 Huskvarna, Sweden
EC DECLARATION OF CONFORMITY
(Applies to Europe only)
The undersigned manufacturer,
Husqvarna Zenoah Co.,Ltd.,
1-9, Minamidai, Kawagoe, Saitama, Japan,
declares under sole responsibility that the following products referred to in this
declaration conform with the requirement of the following COUNCIL’S DIRECTIVE.
The products referred to are :
SOUND LEVEL 1) VIBRATION LEVEL 2)
measured guaranteed
a
hv, eq
MODEL
EBZ8001 71.9 cm 3 110 dB(A) 112 dB(A) 100 dB(A) 6.0 m/s 2
DISPLACEMENT
ISO 7917
L
pAeq
2000/14/EC
L
WA
ISO 22867 (prEN 15503)
* Specifications are subject to change without notice
1) Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC.
Reported soundpower level for the machine has been measured with the original attachment that gives the highest level.
The difference between guaranteed and measured sound power is that the guaranteed sound power also includes disper-
sion in the measurement result and thevariations between different machines of the same model according to Directive 2000/
14/EC.
Reported data for equivalent sound pressure level (L
pAeq ) at the operator’s ear for the machine has a typical statistical disper-
sion (standard deviation) of 1 dB (A), and is calculated as the time-weighted energy total for sound pressure levels under
various working conditions with the following time distribution: 1/7 idling and 6/7 max speed.
2) Reported data for equivalent vibration level (a hv,eq ) at the control handle has a typical statistical dispersion (standard devia-
tion) of 1 m/s 2 .