Zenith HD-SAT520 - Manual (Page 95)

94
206-3813
8-18. Testing the System
Checks the integrity of the DIRECTV ® High-Definition Receiver. If any problems are detected, a
short message will be displayed.
To test DIRECTV HD Receiver :
1. Press the Menu button on the Remote Control to display the on-screen menu.
2. Scroll down using “ E ” on the remote control.
3. Select the System menu by pressing “ ”.
4. System Test will be automatically highlighted.
5. Move the highlight to the right with “ G ”.
6. Press “ ” to activate the system test.
It will run automatically from Signal Strength to Phone Connection and if there is any problem in
your system, the pop-up box will be displayed.
The highlight will return to the previous level after the process is finished.
7. Press the Exit