beautypg.com

ZyXEL Communications ZYWALL IDP 10 User Manual

Page 7

background image

IDP Support Notes


7

1. Connect one PC to IDP’s management port by crossed Ethernet cable. Make sure MGMT port

light is on.

2. Go to Start->Settings->Network and Dial-up Connections, and select the Ethernet connection

you are connecting to IDP device.

3. Change PC’s IP address to 192.168.1.5, subnet mask= 255.255.255.0 from properties.

4. Log into IDP’s WEB GUI via browser.

All contents copyright (c) 2004 ZyXEL Communications Corporation.