Zebra Technologies Zebra LP 2824-Z - Manual (Page 35)

980531-001 A LP 2824-Z User Guide 35
4
Maintenance
Cleaning
When you clean the printer, use one of the following supplies that best suits your needs:
:
The cleaning process takes just a couple of minutes using the steps outlined below.
Cleaning Supplies
Cleaning pens (12)
Cleaning swabs (25)
Printer Part Method Interval
Print head Let the print head to cool for a minute, then use a
new cleaning pen to swab the the thin gray line
on the print head from end to end.
NOTE: You do not have to turn off the printer to
do this. When using direct
thermal: after every
roll of media.
Platen roller See “Platen Considerations” in the Maintenance
chapter. Manually rotate the platen roller. Clean
it thoroughly with 95% medical-grade alcohol
and a cleaning swab, cleaning card, or lint-free
cloth. As needed.
Peel bar Clean it thoroughly with 95% medical-grade
alcohol and a cotton swab.
Let alcohol disappate and the printer dry
completely.
Tear bar
Media path
Exterior Water-dampened cloth.
Interior Brush or air blow.
Cutter Use tweezers to remove scraps.